APPNOTE: Connecting a 10:1 current clamp to the PM7000

In addition to the provided Rogowski Coils the input channels on the PM7000 can be configured to work with voltage output current clamps. This application note shows the steps a user must go through to configure the inputs to work with a 10:1 voltage output clamp. Instructions for other input ratios such as 100:1 are similar.

Setting up the input.

If a Secondary CT (current Transformer) ratio is specified then click on the Secondary CT button to turn it off

References

THE INFORMATION PROVIDED IN THE PRONTO FOR WINDOWS KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. OUTRAM RESEARCH LTD DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL OUTRAM RESEARCH LTD OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF OUTRAM RESEARCH LTD OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

APPNOTE: Connecting a 10:1 current clamp to the PM7000.

Target Audience.

Summary.

Setting up the input.

References